Antmed disposable IBP transducers is a single-use kit for blood pressure monitoring. It is a transducer specially designed for medical use that can sense pressure and convert it into a usable output signal. Disposable IBP Transducers uses medical grade polycarbonate and polyvinyl chloride as the main body of the transducer.Antmed supplies single-channel transducer, dual-channel transducer, triple channel transducer and blood sampling transducer.
Antmed also supplies full range of accessories of disposable IBP transducers, such as fixing plates, mounting clamp and cables for different brands of monitoring. Disposable IBP Transducers must be highly accurate and easy for transportation, especially when the device is directly connected to the patient. If the transducer is used in a monitoring instrument integrated into a medical device, use standard packaging materials such as stainless steel and anodized aluminum.
Disposable IBP Transducers are usually used to monitor the invasive blood pressure of the human body such as arterial pressure, central venous pressure, pulmonary artery pressure and left coronary artery pressure, and directly obtain the physiological parameter of blood pressure, which is used for clinical diagnosis, treatment and treatment of diseases and prognosis estimates provide an objective basis.With the rapid technology development in medical institutions, there are more types of disposable IBP transducers. Different types of disposable IBP transducers have different functions. In recent years, disposable IBP transducers have been widely developed in many fields, especially in detection. The following is a detailed introduction on how to install and use disposable IBP Transducers.
Installation Procedures for Disposable IBP Transducers:
1) Turn on the monitor before connecting the pressure transducer system.
2) Use sterilization measures to open the package and confirm that all interfaces are safely sealed and the three-way valve and other accessories work in good condition.
NOTE: When connecting the fittings, do not over-tighten.
3) All ports of the plug valve should be covered with protective caps with holes, until the sensor system is filled with heparin physiological saline solution and the air bubbles are exhausted, and then replaced with non-porous protective caps.
4) Connect the pressure transducer to the monitor and follow the monitor instructions to zeroing the monitor.
5) Flush the tubing with heparinized saline and remove the air in the tubing.
Note: There must be no air bubbles remaining in the tubing.
6) After all the tubings are filled with heparin saline, connect the transducer system to the human body.
Antmed invasive blood pressure transducer uses the world’s leading pressure chip to sense blood pressure changes in a subtle way, providing the most-timely clinical indications for clinical operations. All of our invasive blood pressure transducer are 100% factory tested, which ensures the quality of our products. Antmed disposable pressure transducer (DPT) is widely used in critical care and anesthesia that provides consistent and accurate readings during invasive blood pressure monitoring.
Please contact our team for more product information.
Post time: Sep-01-2022